A spring manufacturing company has been fined after an employee had two fingers of his right hand severed whilst attempting to lubricate a bandsaw.
In October 2019 a labourer employed by Hanson Springs Ltd in Rochdale, was assisting in the cutting back department to cut sections of steel spring using a vertical bandshaw when the blade began to smoke and squeal.
The worker decided to replace the blade, as on inspection it appeared heavily worn. He attempted to lubricate the new blade by pressing a cardboard tube of wax onto the exposed section of it whilst it ran. The tube was drawn in, drawing in the worker's hand too, severing the middle two fingers at the first and second knuckle.
An investigation by the Health and Safety Executive (HSE) found that although the worker had received training from the supervisor in using the machine, it was of poor quality with no formal competency assessment, nor was he certain that he could use the machine unsupervised.
Also, despite lubrication of the blades in this manner being standard practice within the company, it was unnecessary as the machine was self-lubricating. The worker had been shown how to do this during training in order to minimise the time needed for the blade to become greased using the inbuilt lubrication system and therefore operational.
Operational management was not aware of this dangerous practice and therefore no safe method of lubricating the blades had been provided.
Hanson Springs Ltd pleaded guilty to breaching the Health and Safety at Work etc. Act 1974, was fined £200,000 and ordered to pay costs of £5,394.
HSE inspector Peter Lennon commented on how this incident could have easily been avoided, and that employers should "ensure they carry out an assessment of the risks and put in safe system of works for the operation of all machinery".
"Employers should also ensure that adequate supervision, instruction and training is provided to workers".
